USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 54 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.21 System user (set_user)
To change the M40GBP user name (factory default user name is: “customer”) use the command
"set_user” . The new user name will take effect after the next login.
Example:
6.22 System password (set_psw)
To change the M40GBP system password (factory default is “gtadmin1” ) Use the command
“set_psw” . The new password will take effect after the next login.
Example:
6.23 Unit name.
The M40GBP supports individual names for each M40GBP unit on the network. The User can set the
M40GBP unit name (default unit name: M40GBP) using the command: set_unit_name. Unit name can
be up to 25 symbols
Example:
M40GBP$ set_user Tomcat
System user name changed, this operation requires logoff.
Continue? (Y/n).
n
command succeeded.
M40GBP$
M40GBP$ set_psw
Changing password for customer
Old password:
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and
numbers.
Enter new password:
Re-enter new password:
Password changed.
command succeeded.
M40GBP$
M40GBP$ get_unit_name
unit name: M40GBP
command succeeded.
M40GBP$ set_unit_name first
command succeeded.
M40GBP$