USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 107 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
auto - autonegotiation with counterpart ethernet port.
force_10H - force 10 Mbit/s half duplex mode.
M40GBPConfM2n
4.16
OCTET STRING
(SIZE(5..7))
read-write
Set/Get the monitor port link to network
link feature state.
Set Example: 'on;off' - enable this
feature for MON0 and disable for
MON1
Get Example: 'MON0: on;MON1: off'.
M40GBPConfWeb
4.17
INTEGER
read-write
off(1),
on(2)
Set/Get WEB interface state (on/off)
M40GBPOpHbActMode
5.1
INTEGER
read-write
on (1),
off (2)
Get/Set heartbeat active mode on/off.
M40GBPOpActBypass
5.2
INTEGER
read-write
off (1),
on (2),
tap (3),
linkdrop(4),
tapi12(5),
tapa(6),
tapai1(7),
tapai2(8),
tapai12(9)
Get/Set the state of the active bypass
state (inline/bypass/tap/linkdrop).
M40GBPOpPasBypass
5.3
INTEGER
read-only
off (1),
on (2)
Get the state of the passive bypass state.
M40GBPRecoveryDefault
6.1
INTEGER
write
Restore system default parameter.
M40GBPTrapConfApplFail
7.2
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on
application failed/restored events status
change: M40GBP TrapApplFail /
M40GBPTrapApplRecover.
M40GBPTrapConfBypass
7.3
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on
bypass(passive and Active) status
change events:
M40GBPTrapActBypassOn / M40GBP
TrapActInlineOn,
M40GBP TrapPasBypassOn /
M40GBPTrapPasBypassOff,
M40GBP TrapTapOn,
M40GBPTrapLinkDropOn,
M40GBP TrapTapi12On, M40GBP
TrapTapaOn,
M40GBP TrapTapai1On, M40GBP
TrapTapai2On,
M40GBP TrapTapai12On.
M40GBPTrapConfMonLink
7.4
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on
Monitor ports Link status change events:
M40GBP TrapMon0LinkDown /
M40GBPTrapMon0LinkUp,
M40GBP TrapMon1LinkDown /
M40GBPTrapMon1LinkUp.
M40GBPTrapConfNetLink
7.5
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on
Network ports Link status change
events: M40GBP TrapNet0LinkDown /
M40GBP TrapNet0LinkUp,
M40GBP TrapNet1LinkDown /
M40GBPTrapNet1LinkUp.
M40GBPTrapConfTerm
7.6
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on
Terminal connect / disconnect status
change events: M40GBP TrapTermDisc
/ M40GBP TrapTermCon.
M40GBPTrapConfErr
7.7
INTEGER
read-write
enable (1),
disable (2)
Enable/Disable getting trap info on error
reports from the system:
M40GBPTrapErr.