USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 64 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.41 Set default parameters (set_default)
Restore the factory default settings for all parameters including system user name and password.
Command does not restore rs232 port speed.
Example:
The factory default settings are:
IP address: 10.10.10.200
Net mask: 255.255.255.0
Gateway: 10.10.10.200
hb_interval : 5 ms
hb_holdtime: 20 ms
enable snmp traps: disabled all snmp trap -
snmp server ip: 192.168.0.6
snmp version: 1
Session expired time: 900 sec
WEB https: enabled
TFTP server ip: 192.168.0.6
SNMP user: admin
SNMP password: gtadmin1
Unit name: M40GBP
TFTP root: tftpboot
Two port link: disabled
Expire state: Bypass
Keep heartbeat active mode: disabled
Management port: enabled
Heartbeat active mode: ON
System user: admin
System user password: gtadmin1
Heartbeat packet transmit direction: mon0
Heartbeat packet fail criteria: unidir
Ethernet Management port parameters: auto
Remote log state: disabled
NTP: off
Telnet: off
Remote log server IP: 192.168.0.6
NTP server IP: 192.168.0.6
Timezone: UTC
Tacacs state: off
Tacacs server IP: 192.168.0.6
WEB user name: admin
WEB user password: gtadmin1
Tacacs secret key: default_tac_key
M40GBP$ set_default
command succeeded.
M40GBP$