USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 39 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.13 Restore from Heartbeat expiration event (en_act_hb_restore)
The M40GBP support automatic or manual heartbeat restore after a heartbeat expiration event.
The default value for the en_act_hb_restore is ON.
When the en_act_hb_restore is ON the M40GBP will restore to
Inline (Normal)
state when the
heartbeat packets will be received from the Monitor port.
When the en_act_hb_restore is OFF the M40GBP preserves its state and no heartbeat packets are
generated.
The following actions should be taken to restore the normal operation:
Restore external environment to normal work.
Send command “set_bypass_mode inline”
Send command “set_hb_act_mode on”
M40GBP$ get_en_act_hb_restore
restore active state: on.
command succeeded.
M40GBP$ set_en_act_hb_restore off
command succeeded.
M40GBP$ get_en_act_hb_restore
restore active state: off.
command succeeded.
M40GBP$