USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 101 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.62.12 snmp password
– set_snmp_user_psw
The SNMP V 3 requires to set password to encrypt decrypt the SNMP information.
set_snmp_user_psw
set_snmp_user_psw [OLD] NEW - set snmp user password (8 - 60 symbols).
6.62.13 snmp community status (get/set_snmp_status)
The snmp_comunity_status activate or deactivate the SNMP entry
set_snmp_status off/on - set snmp community status.
M40GBP$ set_snmp_user_psw gtadmin1
New SNMP setting will take effect after apply_snmp.
command succeeded.
M40GBP$
M40GBP$ get_snmp_status
snmp community status: on
command succeeded.
M40GBP$ set_snmp_status off
New SNMP setting will take effect after apply_snmp.
command succeeded.
M40GBP$ apply_snmp
SNMP restart is in progress, please wait.
command succeeded.
M40GBP$ get_snmp_status
snmp community status: off
command succeeded.
M40GBP$