USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 57 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.27 Display M40GBP state (get_dev_state)
Show the current M40GBP Bypass and operational mode state.
Note: This command resets the Alarm LED. Example:
Fan status displayed if hardware version is 0.1.0.0 or higher.
Ctrl: M40GBP$ get_dev_state 1
ERROR: wrong parameter number!
get_dev_state - get current state.
Ctrl: M40GBP$ get_dev_state
Time: Tue Jan 21 09:54:24 2014
active state: inline.
passive state: inline.
eth management port: on.
application: alive.
rs232 terminal: connected.
network port 0: link down.
network port 1: link down.
monitor port 0: link up.
monitor port 1: link up.
------------------------------------------
Sensor name current (C) peak(C)
SD10 (FN11) 32 33
SD11 (FN12) 36 36
SD12 (FN13) 30 31
SD13 (FN10) 34 34
SI10 (FN11) 34 35
SD20 33 34
SI20 27 27
CP01 36 -
CP02 41 -
CP03 35 -
CP04 35 -
CP07 47 -
MO11 37 -
BCM1 43 44
BCM2 40 41
BCM3 41 42
BCM4 40 42
BCM5 45 46
BCM6 41 42
BCM7 41 42
BCM8 44 45
------------------------------------------