USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 131 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
7.11.4 Access
Each entry support different level of access (read only, read/write, trap only, read Only with Trap,
read/write with Trap)
7.11.5 Name
Define the entry name = SNMP user \community name
7.11.6 Status
Activate/deactivate the SNMP entry
7.11.7 SNMP control port
Message (min - 1, max - 49151, default - 161)
Trap port (min - 1, max - 49151, default - 162).
7.11.8 SNMP trap account
7.11.9 SNMP trap account allow to add/remove/view additional destinations for SNMP
traps.SNMP trap control
SNMP trap control destined to enable/disable SNMP trap groups. SNMP traps are disabled by default. It
can be enabled by checking the check box for the relevant trap group.
a)
Appl fail enable/disable following traps:
M40GBPTrapApplFail
M40GBP TrapApplRecover.
b)
Bypass enable/disable following traps:
M40GBP TrapActBypassOn
M40GBP TrapActInlineOn
M40GBP TrapPasBypassOn
M40GBP TrapPasBypassOff
M40GBP TrapTapOn
M40GBP TrapTapi12On
M40GBP TrapTapaOn
M40GBP TrapTapai1On
M40GBP TrapTapai2On
M40GBP TrapTapai12On
c)
Mon link enable/disable following traps:
M40GBP TrapMon0LinkDown
M40GBP TrapMon0LinkUp
M40GBP TrapMon1LinkDown
M40GBP TrapMon1LinkUp.
d)
Net link enable/disable following traps:
M40GBP TrapNet0LinkDown
M40GBP TrapNet0LinkUp
M40GBP TrapNet1LinkDown
M40GBP TrapNet1LinkUp.
e)
Terminal enable/disable following traps: