USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 81 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.54.3 Restore the M40GBP saved configuration.
To restore saved configuration the command “restore_conf” should be used (to display saved
configurations run “get_list_conf”).
After restoring configuration the M40GBP must be rebooted.
6.54.4 Remove saved configuration.
The command “remove_conf” is used to remove saved configuration form the Flash memory.
6.55 Telnet access
The M40GBP support Telnet protocol. By default the Telnet access is Disabled.
The Command “get_telnet_state” is used to retrieve telnet access state.
The Command “set_telnet_state” is used to enable or disable telnet access.
6.56 Statistics counters.
The M40GBP support several statistics counters. Statistics can be displayed and cleared.
M40GBP$ restore_conf cust2_31
Restoring configuration require reboot device.
Continue? (Y/n)
y
rebooting...
M40GBP$ remove_conf cust1_03
command succeeded.
M40GBP$
M40GBP$ get_telnet_state
telnet state: off.
command succeeded.
M40GBP$ set_telnet_state on
command succeeded.
M40GBP$ get_telnet_state
telnet state: on.
command succeeded.
M40GBP$ set_telnet_state on
command succeeded.
M40GBP$
M40GBP$ clear_stat
command succeeded.
M40GBP$