USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 40 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.14 Change Bypass state on RX/TX error detection (rx_tx_err_mode)
The M40GBP can place itself into Bypass or Linkdrop in case it detects RX/TX errors on the Monitor
ports or on the Network ports.
Example:
M40GBP$ get_rx_tx_err_mode
rx and tx error processing mode:
trap: enable
timeout: 5 sec
mon: bypass
net: none
threshold: 10 err/sec
command succeeded.
M40GBP$ set_rx_tx_err_mode trap timeout mon net
threshold
- set rx and tx error processing mode
trap
: on|off - enable/disable trap
timeout: >0 - minimal time between traps
mon
: none/bypass/linkdrop - changing
Bypass mode when number of errors per
second on MONx ports exceeds threshold
net
: none/linkdrop -
changing Bypass mode when number of
errors per second on NETx ports exceeds
threshold
threshold : >0 (default - 10)
M40GBP$ set_rx_tx_err_mode on 4 linkdrop linkdrop 20