USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 110 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.64 SNMP traps.
Trap
Value Description
M40GBPTrapStart
1
Reserved
M40GBPTrapApplFail
2
Trap is sent when the Monitor application does not send back
the HB packets within the hold time Interval defined by
hb_holdtime variable.
M40GBPTrapApplRecover
3
Trap is sent when the Monitor application starts again to send
the HB packets
M40GBPTrapPasBypassOn
4
Trap is sent when passive bypass changes to bypass mode.
M40GBPTrapPasBypassOff
5
Trap is sent when passive bypass changes to inline mode.
M40GBPTrapActBypassOn
6
Trap is sent when active bypass changes to bypass mode.
M40GBPTrapActInlineOn
7
Trap is sent when active bypass changes to inline mode.
M40GBPrapMon0LinkDown
8
Trap is sent when monitor port-0 link drops.
M40GBPTrapMon0LinkUp
9
Trap is sent when monitor port-0 link is restored.
M40GBPTrapMon1LinkDown 10
Trap is sent when monitor port-1 link drops.
M40GBPTrapMon1LinkUp
11
Trap is sent when monitor port-1 link is restored.
M40GBPTrapNet0LinkDown
12
Trap is sent when network port-0 link drops.
M40GBPTrapNet0LinkUp
13
Trap is sent when network port-0 link is restored.
M40GBPTrapNet1LinkDown
14
Trap is sent when network port-1 link drops.
M40GBPTrapNet1LinkUp
15
Trap is sent when network port-1 link is restored.
M40GBPTrapTermDisc
16
Trap is sent when local serial RS232 connection is
disconnected.
M40GBPTrapTermCon
17
Trap is sent when local serial RS232 connection is connected.
M40GBPTrapErr
18
Trap is sent as indication of an error within the M40GBP, with
some description of the error.
M40GBPTrapLogSize
19
Trap is sent when the log file size exceed its maximum
allowed size.
M40GBPTrapTapOn
20
This trap is sent when switch changes mode to tap.
M40GBPTrapUpdate
21
Trap is sent when firmware update is finished.
M40GBPTrapLinkDropOn
22
This trap is sent when switch changes mode to linkdrop.
M40GBPTrapUpdateReboot
23
Trap is sent when firmware update is finished and device is
rebooted.
M40GBPTrapTapi12On
24
Trap is sent when active bypass changes to TAPI12 mode.
M40GBPTrapTapaOn
25
Trap is sent when active bypass changes to TAPA mode.
M40GBPTrapTapai1On
26
Trap is sent when active bypass changes to TAPAI1 mode.
M40GBPTrapTapi2On
27
Trap is sent when active bypass changes to TAPAI2 mode.
M40GBPTrapTapi12On
28
Trap is sent when active bypass changes to TAPAI12 mode.
M40GBPTrapPower1OK
29
This trap is sent when power supply 1 restored from failure.
M40GBPTrapPower2OK
30
This trap is sent when power supply 2 restored from failure.
M40GBPTrapCpuFanOK
31
This trap is sent when CPU FAN restored from failure.
M40GBPTrapRxTxError
32
This trap is sent when device detect RX or TX error.
Next trap can be send in 5 sec
ibsTrapNet0Disable2pl
33
This trap is sent when network port 0 was disable by 2pl
function
ibsTrapNet0Enable2pl
34
This trap is sent when network port 0 was enable by 2pl
function
ibsTrapNet1Disable2pl
35
This trap is sent when network port 1 was disable by 2pl
function