USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 88 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.58.1 Set/delete permitted IP range
New permitted IP range can be added by command “set_ mgmt_permit_ip”
Permitted IP range can be removed by command “del_ mgmt_permit_ip”
Command get parameter NetIp/NetMask or “all”
With parameter “all” command remove all permitted IP ranges and device will receive commands from
all IP.
6.58.2 Display permitted IP range
Permitted IP range can be displayed by command “get_ mgmt_permit_ip”
6.58.3 Check permitted IP range
Permitted IP range can be checked by command “check_mgmt_permit_ip”
M40GBP$ set_mgmt_permit_ip 192.168.0.0/24
command succeeded.
M40GBP$
M40GBP$ del_mgmt_permit_ip 192.168.0.0/24
command succeeded.
M40GBP$
M40GBP$ get_mgmt_permit_ip
permitted ip: 192.168.0.0/24
command succeeded.
M40GBP$
M40GBP$ check_mgmt_permit_ip 192.168.0.0/24
All management servers can be accessed.
command succeeded.
M40GBP$