Fukuda Denshi DS-8400 Скачать руководство пользователя страница 209

Страница: 209 / 274

9-41

Cause 3

IB-8004 or expansion module is malfunctioning.

Solution

Immediately turn OFF the power and cease the operation.



The following error messages related to the expansion module are displayed on the monitor.

<IB* Slot* Module Failure>, <IB* Slot* Analog Unadjusted>,
<IB* Slot* Check Module>, <IB* Slot* Out of Operating Temp. Range>

Cause

The module connected to the IB-8004 slot is malfunctioning.

Solution

Immediately turn OFF the power and cease the operation.



<IB* Slot* Module Disconnected> is displayed.

Cause 1

The expansion module is not properly connected.

Solution

Disconnect and connect the expansion module.

Cause 2

The slot used in the IB-8004 is malfunctioning.

Solution

Insert the expansion module into another slot. If it operates properly, the IB-8004 needs to be repaired.

Cause 3

IB-8004 or expansion module is malfunctioning.

Solution

Immediately turn OFF the power and cease the operation.

Extended Display Unit



Nothing is displayed on the extended display unit. The same display with the main unit is

displayed.

Cause

The video cable of the extended display unit is connected to the external monitor connector of the main unit.

Solution

Connect the cable to the extended display unit connector on the main unit.



The touch panel does not function on the extended display unit.

Cause

The serial communication cable is not connected.

Solution

Connect the serial communication cable of the extended display unit to the extended serial connector (COM A,
COM B) of the main unit.

Содержание DS-8400



















































































































































































































































































Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды

Fukuda Denshi DS-8400, Руководство по обслуживанию

Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды