Fukuda Denshi DS-8400 Скачать руководство пользователя страница 178

Страница: 178 / 274

9-10

SpO

Measurement (HS-8312N, DS-8007N, HG-820)



<SpO

Check Sensor Attach.> is displayed.

Cause

The sensor is detached from the patient.

Solution 1

Check if the sensor is properly attached to the patient.

Solution 2

Check that the light emitting and receiving parts of the sensor LED are aligned.



<SpO

Pulse Search> is displayed.

Cause 1

The amplitude of the pulse waveform is too low, or the sensor is not positioned correctly.

Solution

Check that the light emitting and receiving parts of the sensor LED are aligned.

Cause 2

The sensor has not been attached long enough to obtain stable measurement.

Solution

After the sensor attachment, wait and see for about one minute until the waveform stabilizes.



<SpO

No Pulse Detected> is displayed.

Cause

The amplitude of the pulse waveform is too low, or the sensor is not positioned correctly.

Solution

Check that the light emitting and receiving parts of the sensor LED are aligned.
Avoid the sensor from exposure to ambient light.



<SpO

Motion Artifact> is displayed.

Cause

There is excessive body motion from the patient.

Solution

Relocate the sensor to which body motion will have less influence.



The pulse waveform is not displayed, or interrupted.

Situation: <SpO

Check Sensor Attach.> is displayed.

Cause 1

The amplitude of the pulse waveform is too low, or the sensor is not positioned correctly.

Solution

Check that the light emitting and receiving parts of the sensor LED are aligned.

Cause 2

The sensor is defective.

Solution

Replace the sensor.

Содержание DS-8400



















































































































































































































































































Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды

Fukuda Denshi DS-8400, Руководство по обслуживанию

Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды