Fukuda Denshi DS-8400, Руководство по обслуживанию

Страница: 16 / 274

xii
Precautions about Connections to Peripheral Devices
To use the equipment safely and to ensure maximum performance of the equipment, connection of other
manufacturer's equipment to this equipment is not authorized, unless the connection is explicitly approved by Fukuda
Denshi. It is the user's responsibility to contact Fukuda Denshi to determine the compatibility and warranty status of
any connection made to another manufacturer's equipment.
 When multiple equipments are connected to the patient, it may be necessary to take measures for connection
(use of separation device), power supply (use of isolation power), grounding (additional protective earth). If
these measures are not properly taken, a leakage current may flow between the equipments, or the total amount
of leakage current may exceed the limit specified on IEC 60601-1-1.
 Only the peripheral devices specified by Fukuda Denshi should be connected with the given procedure. Use of
an unspecified device may cause electric shock to the patient and/or operator due to excessive leakage current.
 Although the peripheral device connectors on the DS-8400 System are, with some exceptions, isolated from
the power supply, the connecting peripheral devices should comply with IEC 60601-1. It is the user's
responsibility to verify that the overall system complies with IEC 60601-1-1.
 To prevent danger of electric shock, always position the peripheral devices away from the patient.

Network equipment including printer and hub should be located outside the "Patient Environment". If located
inside the "Patient Environment", it may result in electric shock to the patient or the operator.
 Combinations of medical equipment with non-medical equipment must comply with IEC 60601-1-1 or IEC
60601-1. Never use a multiple portable socket-outlet or extension cable when connecting the equipments
unless it is supplied specifically for use with that equipment.
CAUTION
WARNING