Fukuda Denshi DS-8400 Скачать руководство пользователя страница 195

Страница: 195 / 274

9-27



<Unknown CO

Sensor> is displayed.

Cause

Unsupported CO

sensor is connected.

Solution

Connect the specified CO

sensor.



<CO

Disconnected> is displayed.

Cause

When the cable is disconnected during CO

monitoring, this message will be displayed.

Solution 1

To cease monitoring, press the [Alarm Silence] key to clear the message and silence the alarm.

Solution 2

To continue monitoring, plug in the cable. This will clear the message and silence the alarm.

Recorder Unit (HR-800)



<Check Paper> is displayed, and printing cannot be performed.

The power supply LED on the HR-800 is lit in orange.
<PAPER OUT> is displayed inside the [Print Start/Stop] user key.

Cause

There is no paper in the printer.

Solution

Set the paper in the paper holder.



<Check Cassette> is displayed, and printing cannot be performed.

The power supply LED on the HR-800 is lit in orange.
<CASSETTE> is displayed inside the [Print Start/Stop] user key.

Cause

The paper holder is open.

Solution

Firmly close the paper holder.



Although the paper is fed, printing is not performed.

Cause

The paper is not correctly installed. The front and backside of the paper is set oppositely.

Solution

Set the paper in the paper holder so that the logo, FUKUDA DENSHI CO.,LTD appears on the upper surface.



The second and third waveforms are not printed for manual printing or alarm printing.

Cause

The second and third waveforms are not set on the printing setup screen.

Solution

Set the second and third waveform on the corresponding printing setup screen.

Содержание DS-8400



















































































































































































































































































Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды

Fukuda Denshi DS-8400, Руководство по обслуживанию

Результаты поиска

Содержание DS-8400

Отзывы:

Бренды по названию

Популярные бренды