Fujitsu Stylistic CE CT2000 Series, Руководство пользователя

Страница: 31 / 64

28
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n F o u r
FOR BETTER COMMUNICATIONS
This personal computer may not operate properly due to
the operating environment. Strictly observe the
following precautions when installing the main unit of
the computer:
■
Since this personal computer is compliant only with
IEEE802.11b/g devices, it is not possible to communi-
cate with IEEE802.11a devices.
■
The recommended wireless communications distance
is within a line-of-sight radius of 25 meters. For rea-
sons related to the characteristics of the wireless LAN,
however, the actual communications distance depends
on the structure of the building in which the wireless
LAN function is to be used, the presence/absence of
obstructions, the types of software to be used, installa-
tion status, radio-wave status, or other operating con-
ditions. Decreases in communications speed or a
communications failure may also occur.
■ If a broadcasting station or wireless communications
equipment is present nearby and this prevents the
computer from communicating properly, moving the
main unit of the computer is suggested. Radio inter-
ference may also occur if the intensity of ambient
radio waves is too high.
STARTING TRANSMISSION
To communicate using the wireless LAN function, set
the computer to a status from which it can transmit, as
follows:
To activate the transmission:
1. Double-click the Wireless Network icon in the sys-
tem tray (it looks like two overlapping monitors).
2. Click on the Wireless Information tab. Wait for the
network list to appear, and select the one you want
to use. Click [Connect]. The radio will be turned
on.
Access Point Mode: Transmission is enabled.
Ad Hoc Mode: Restart your computer to enable the
radio.
STOPPING TRANSMISSION
To use this product inside hospitals, clinics, or airplanes,
or in other places where the use of electronic equipment
is regulated, stop the transmission of radio waves from
the wireless LAN beforehand.
Deactivation using Windows
1. Click on [Start] -> Settings -> Network and Dial-
up Connection.
2. Tap PCI-PRISM1, then click File in the toolbar at
the top of the screen.
3. Click Disable; wireless communications switching
will be deactivated and the transmission of radio
waves from the wireless LAN will be stoppe
d.
Figure 4-2. Access Point (Infrastructure) Mode Network
Internet
ADSL modem,
cable modem,
or similar
Wired LAN
Wireless LAN
Access Point*
* An optional hub for a wired
LAN may be required depending
upon the type of access point used.