Fujitsu Stylistic CE CT2000 Series, Руководство пользователя

Страница: 37 / 64

34
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n F i v e
3. Apply the screen protector to the display surface.
When doing so, orient the screen protector with the
adhesive side of the screen protector facing the
display and the notched corner of the screen
protector oriented as shown in Figure 5-2.
Figure 5-2. Installing the screen protector
4. Apply pressure to the screen protector with your
finger using a continuous wiping motion along the
edges. The adhesive sets completely within 48 hours.
To ensure a good seal between the screen protector
and the display, do not lift the screen protector from
the display once it has been applied.
5. Remove the protective plastic cover from the face of
the screen protector, as shown in Figure 5-3.
Figure 5-3. Removing the protective cover
6. Clean any residue left behind by the protective
coating from the exposed surface of the screen
protector by wiping gently with a soft cotton cloth
dampened with isopropyl alcohol. Wipe the screen
protector with a soft dry cloth to remove any low-
tack adhesive; this will help prevent the pen tip from
squeaking.
The screen protector is now installed.
STORING THE TABLET
Store the tablet where it will not be exposed to vibration,
dust, extreme temperatures (high and low), high
humidity, and direct sunlight.
Store the Stylistic CT2000 Series CE Tablet in the Off
state with a fully charged battery installed.
If you intend to store the tablet for an extensive period of
time, the battery that maintains system time may need to
be replaced. Replacement of the clock battery should
only be performed by authorized technicians.
For long term storage, it is recommended that you save
all programs, shut down the system, and remove the
battery. When restarting, reset the device completely.
AVOIDING OVERHEATING
The tablet monitors its internal temperature. As the
internal temperature approaches the tolerable limits of
heat-sensitive components, system functions are auto-
matically limited or turned off to prevent damage.
CLEANING THE DISPLAY
To clean the tablet display, wipe the screen surface gently
using a soft, dry cotton cloth or one slightly dampened
with a diluted neutral detergent solution. If you use a
dampened cloth, be sure to wring out all excessive solu-
tion in order to prevent any of the solution from getting
into the device.
PWR PWR
CLR CLR
BKS BKS
F1 F1 F2 F2
F3 F3 F4 F4
1
2
3
4
5
6
7
8
9
0
CLR
BS
F1 F2
F3 F4
PWR
ENT
PWR PWR
CLR CLR
BKS BKS
F1 F1 F2 F2
F3 F3 F4 F4
1
2
3
4
5
6
7
8
9
0
CLR
BS
F1 F2
F3 F4
PWR
ENT
Do not expose your Stylistic CT2000 Series
CE Tablet to direct sunlight for extended
periods of time as excessive temperatures
may damage your tablet.
• The Stylistic CT2000 Series CE Tablet
is not waterproof . Do not pour liquids
on the tablet or wash the tablet with a
heavily soaked cloth.
• When cleaning the display, use care to
avoid pushing foreign matter between
the display and the edge that frames
the display.
• Do not wipe the tablet with thinner,
benzine, or other volatile substance.
Such solutions can damage the device
or erase printed letters and icons.