manualshive.com logo in svg

Fujitsu F2MCTM-16LX, Руководство по оборудованию

"Продукт Fujitsu F2MCTM-16LX - это высококачественный ридер кодов для работы с техникой. Вы можете бесплатно загрузить руководство по обслуживанию и аппаратным устройствам с нашего сайта. Этот manual поможет вам более эффективно использовать ваше устройство и сохранить его в отличном состоянии." Всегда загружайте его с manualshive.com.

Поделиться
Скачать
background image

114

CHAPTER 6  CLOCK SUPERVISOR

Bit name

Function

bit7

SCKS 
Sub clock select

This bit permits built-in CR oscillation clock to be used as a sub-clock. Only "S" suffix
product is valid to this function. 
"1": It is possible to change to the sub clock mode with built-in CR oscillation clock. 
"0": It is not possible to change to the sub clock mode. 
This bit is initialized to "0" by power-on reset, external reset, or low voltage detection
reset in "T" suffix product. It is initialized to "0" by power-on reset or external reset
without "T" suffix product. 
It is necessary to set this bit to "1" in the main clock mode before the sub-clock
supervisor after the above-mentioned is initialized operates automatically. 
Moreover, after setting to "1", this bit cannot be reset to "0" by software. 

bit6

MM 
Main clock 
missing

This bit indicates the oscillation missing of main clock terminal X0 and X1 was detected. 
"1": Missing main clock has been detected. 
"0": Missing main clock has not been detected. 
This bit is initialized to "0" by power-on reset, external reset, or low voltage detection
reset with "T" suffix product. 
It is initialized to "0" by power-on reset or external reset without "T" suffix product.

bit5

SM 
Sub clock 
missing

This bit indicates the oscillation missing of sub clock terminal X0A and X1A was
detected. No "S" suffix product is valid to this function. 
"1": Missing sub-clock has been detected. 
"0": Missing sub-clock has not been detected. 
This bit is initialized to "0" by power-on reset, external reset, or low voltage detection
reset with "T" suffix product. 
It is initialized to "0" by power-on reset or external reset without "T" suffix product.

bit4

RCE 
CR oscillation 
clock enable

This bit permits built-in CR oscillation. 
"1": Built-in CR oscillation is enabled. 
"0": Built-in CR oscillation is disabled. 
This bit is initialized to "1" by power-on reset, external reset, or low voltage detection
reset with "T" suffix product. 
It is initialized to "1" by power-on reset or external reset without "T" suffix product.
Please set this bit in "1" after confirming both the following:
- The supervisor of main and sub-clock is disabled. 
- MM and SM bits are "0".

bit3

MSVE 
Main clock 
supervisor 
enable

This bit permits monitoring for main clock oscillation. 
"1": Main clock supervisor is enabled. 
"0": Main clock supervisor is disabled. 
This bit is initialized to "1" by power-on reset or low voltage detection reset with "T"
suffix product. 
It is initialized to "1" by power-on reset or external reset without "T" suffix product.

bit2

SSVE 
Sub clock 
supervisor 
enable

This bit permits monitoring for sub clock oscillation. 
"1": Sub clock supervisor is enabled. 
"0": Sub clock supervisor is disabled. 
This bit is initialized to "1" by power-on reset or low voltage detection reset with "T"
suffix product. 
It is initialized to "1" by power-on reset or external reset without "T" suffix product.

bit1

SRST 
Sub-clock mode 
reset

This bit permits the reset output when transmitting from main clock/PLL clock mode to
the sub-mode with sub-clock breakdown. 
"1": Output reset.
"0": Not output reset
This bit is initialized to "0" by power-on reset, external reset, or low voltage detection
reset with "T" suffix product. 
It is initialized to "0" by power-on reset or external reset without "T" suffix product.

bit0

Reserved bit

This bit is reserved.
Be sure to write "0" to this bit.
Read value is always "0".

Содержание F2MCTM-16LX











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F2MCTM-16LX

dbx 902 Manual preview
902
Бренд: dbx Страницы: 8
3Com 3C3FE574BT Quick Start Manual preview
3C3FE574BT
Бренд: 3Com Страницы: 8
Behringer EXPANSION CARD X-DANTE Quick Start Manual preview
EXPANSION CARD X-DANTE
Бренд: Behringer Страницы: 65
ROE EVISON HD101 User Manual preview
EVISON HD101
Бренд: ROE Страницы: 41
LGC wireless InterReach Fusion SingleStar Installation And Operation Manual preview
InterReach Fusion SingleStar
Бренд: LGC wireless Страницы: 154
XNET INS2000 Install Manual preview
INS2000
Бренд: XNET Страницы: 17
Omron ACCURAX G5 - Quick Start Manual preview
ACCURAX G5 -
Бренд: Omron Страницы: 13
Trend Micro IPS Pro-Module-24C-GE-BP-TM Quick Setup Manual preview
IPS Pro-Module-24C-GE-BP-TM
Бренд: Trend Micro Страницы: 3
ZALMAN Fatal1ty FS-V7 User Manual preview
Fatal1ty FS-V7
Бренд: ZALMAN Страницы: 9
ADLINK Technology AMSTX-CF Series User Manual preview
AMSTX-CF Series
Бренд: ADLINK Technology Страницы: 73
Camozzi UVIX Use And Maintenance Manual preview
UVIX
Бренд: Camozzi Страницы: 22
EK-Quantum 3831109836897 User Manual preview
3831109836897
Бренд: EK-Quantum Страницы: 14
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Бренд: ZyXEL Communications Страницы: 263
Transition Networks E-BR-SIC User Manual preview
E-BR-SIC
Бренд: Transition Networks Страницы: 1
Silex technology Embedded Intelligent Module SX-560 Developer'S Reference Manual preview
Embedded Intelligent Module SX-560
Бренд: Silex technology Страницы: 110
Delta Electronics Suppression Inductors LFZ24H Specification Sheet preview
Suppression Inductors LFZ24H
Бренд: Delta Electronics Страницы: 1
Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance preview
43 Pro
Бренд: Hakki Pilke Страницы: 48
VALKYRIE Dragonfang 240 Installation Manual preview
Dragonfang 240
Бренд: VALKYRIE Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды