Fuji Xerox DocuPrint M355 df, Руководство пользователя

Страница: 246 / 428

246
Faxing
Specifying the Fax Settings Options
This section includes:
• "Changing the Fax Settings Options" on page 246
• "Available Fax Settings Options" on page 246
 Changing the Fax Settings Options
1
Press the ( System ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Fax Settings
, and then press the button.
4
Select the desired menu item, and then press the button.
5
Select the desired setting or enter the value using the number pad.
6
Press the button to save the selection.
7
Ensure that the message
This Setting Becomes Effective after Restart
appears, and then press
any button.
8
If necessary, repeat steps 4 to 6 .
To return to the top level of the System menu, press the CA ( Clear All ) button.
 Available Fax Settings Options
You can use the following settings options for configuring the fax system:
Option Description
Ans Select TEL Mode Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external telephone and then pressing the remote receive
code, or by setting
OnHook
to
On
(you can hear voice or fax tones from the
remote machine) and then pressing the
( Start )
button.
FAX Mode* Automatically receives faxes.
TEL/FAX Mode When the printer receives an incoming fax, the external telephone rings for
the time specified in
Auto Ans. TEL/FAX
, and then the printer
automatically receives a fax. If an incoming call is not a fax, the printer beeps
from the internal speaker indicating that the call is a telephone call.
Ans/FAX Mode The printer can share a telephone line with an answering machine. In this
mode, the printer will monitor the fax signal and pick up the line if there are
fax tones.
DRPD Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive
ring service must be installed on your telephone line by the telephone
company. After the telephone company has provided a separate number for
faxing with a distinctive ring pattern, configure the fax setup to monitor for that
specific ring pattern.
Auto Answer Fax Sets the interval at which the printer goes into the fax receive mode after
receiving an incoming call. The interval can be specified within the range of 0
to 255 seconds. The default is 0 second.
Auto Ans. TEL/FAX Sets the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call. The interval can be specified
within the range of 0 to 255 seconds. The default is 6 seconds.
Auto Ans. Ans/FAX Sets the interval at which the printer goes into the fax receive mode after the
external answering machine receives an incoming call. The interval can be
specified within the range of 0 to 255 seconds. The default is 21 seconds.
Line Monitor Sets the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.