Fuji Xerox DocuPrint CM505 da, Руководство администратора

Страница: 368 / 599

13 Problem Solving
368
Problem S
o
lving
13
Paper is often
jammed or
wrinkled. Is the paper loaded correctly
in the tray? Load the paper correctly.
Refer to "Loading Paper" (P.42).
Is the paper tray inserted
correctly? Firmly push in the paper tray until it stops
to insert it correctly.
Refer to "Loading Paper" (P.42).
Is the paper damp? Replace the paper with new one.
Refer to "Loading Paper" (P.42).
Is the paper curled? Turn over the paper in the tray, or replace
the paper with new one.
Refer to "Loading Paper" (P.42).
Are the paper and paper
tray settings correct? Correctly set the paper and paper trays to
correspond to the paper.
Refer to "Changing the Paper Settings" (P.50).
Are any torn pieces of paper
remaining or is there a
foreign object in the
machine? Open the cover of the machine or slide out
the paper tray to remove the torn pieces or
the foreign object.
Refer to "Paper Jams" (P.481) or "Loading
Paper" (P.42).
Is non-standard paper
loaded in the tray? Replace with paper that meets machine
specifications.
Refer to "Paper Types" (P.34) or "Loading
Paper" (P.42).
Is paper exceeding the
maximum fill line in the tray? Load paper in the paper tray so that it does
not exceed the maximum fill line.
Refer to "Loading Paper" (P.42).
Are the paper guides set
correctly? Load the paper correctly, and align the
paper guides to the paper.
Refer to "Loading Paper" (P.42).
Is the image nearly the
same size as the paper? Increase the edge erase widths.
For more information, refer to "3 Copy" in the
User Guide when you copying, or to the help of
the print driver when printing.
Is the paper finely cut out? Some types of paper may not be cut out
finely. Load the paper after fanning it well.
A document is
not fed into the
document
feeder. Is the document small? The minimum size of the document that
can be loaded on the document feeder is
85 x 125 mm (Standard size: A5).
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
An error
message
appears after
paper is loaded
in Tray 5 and the
<Start> button is
pressed. Check the positions of the
paper guides of Tray 5. Adjust the paper guides to the correct
positions.
Refer to "Loading Paper in Tray 5 (MSI)"
(P.46).
Symptom Cause Remedy