Fuji Xerox DocuPrint CM505 da, Руководство администратора, Страница: 357 / 599

Configuration for IC Card Reader (Optional)
357
Au
th
en
ticat
io
n
an
d
Ac
co
u
n
tin
g
F
e
at
u
res
12
7
Select [Smart Card Logout Timing], and then select [Change Settings].
8
Select the authentication logout method, and then select [Save].
9
Select [Close].
Step 3 Registering Smart Card Information
The system administrator can register smart cards using CentreWare Internet
Services.
Note • The information used for authentication can also be set from CentreWare Internet Services.
For more information, refer to the help of CentreWare Internet Services.
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.254).
2
Click the [Properties] tab.
3
Click [Securities], and then click [Smart Card Settings].
4
Select the smart card to use.
1) Click [Edit] next to the smart card.
2) Select the [Enabled] check box, and then set the priority.
3) Click [Apply].
Note • You can select multiple smart cards, but the card detection time increases in proportion to
the number of cards selected. We recommend that you select the required cards only.
5
Register the smart card that you selected the [Enabled] check box for.
1) Click [Edit] next to the smart card.
2) Configure required settings.
3) Click [Apply].
6
To encrypt the smart card information, click the [Encrypt] button in [Encryption
Settings].
Important • Once you encrypt the smart card information, you cannot view or edit the information later.
Also, when you click the [Decrypt] button, the information is reset to the default. You should
backup the smart card information before encryption.
You can backup the smart card setting using [Cloning]. For more information, refer to the help of
CentreWare Internet Services.