Fuji Xerox DocuCentre-IV C2263, Руководство пользователя

Страница: 61 / 443

Control Panel
61
Pr
o
d
uct
O
v
er
v
iew
2
Control Panel
The following describes the names and functions of components on the control panel.
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
3 4 5 6
11 12 13 14 15 16 17 18 19 22 20 21 23
1 2
9
10
8
7
25 24
No. Component Function
1 <Services Home> button Press this button to display the [Services Home] screen.
You can change the services displayed on the [Services Home] screen. For more information,
refer to "1 Before Using the Machine" > "Customizing the Control Panel" > "Customizing the
Button Layout" in the Administrator Guide.
2 Touch screen Displays messages required for operation, and buttons for various features.
You can directly touch the touch screen to instruct operations and set
features.
3 <Log In/Out> button Lights up when a user is authenticated in the System Administration mode,
the Authentication mode, or the Accounting mode. Displays the User ID
entry screen for entering the System Administration mode, the
Authentication mode, or the Accounting mode. Press this button to exit
these modes.
4 <Job Status> button Press this button to check or cancel the current job, to check or print stored
jobs, or to check completed jobs.
5 <Machine Status> button Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Note • When you replace consumables, press the <Machine Status> button to
enable the output devices of the machine to exit the Energy Saver mode.
Then, you can check the current status of the consumables.
6 <Energy Saver> button When the machine is not used for a while, it enters the Energy Saver mode
to reduce power consumption. When the Energy Saver mode is active, the
<Energy Saver> button lights up.
Press this button to enter or exit the Energy Saver mode.