Fuji Xerox DocuCentre-IV C2263, Руководство пользователя

Страница: 244 / 443

4 Fax
244
Fa
x
4
When extra lines are added to the machine, [Fax Receiving Mode] is set to [Auto Receive]
even when [Manual Receive] is selected.
„
Auto Receive
Reception of a fax from a remote machine begins automatically.
Using Auto Receive
When [Fax Receiving Mode] is set to [Auto Receive] on the [Machine Information] screen,
the following two methods are available to receive a fax:
„
When the machine automatically switches to fax reception
When there is an incoming call, the machine automatically receives a fax after it rings for a
certain period of time.
„
When the machine automatically switches between a call and fax reception
When there is an incoming fax, the machine automatically receives a fax. When there is an
incoming call, pick up the telephone receiver to talk while the machine is ringing.
Using Manual Receive
When [Fax Receiving Mode] is set to [Manual Receive], and the machine rings to notify of
an incoming call, pick up the receiver of the external telephone or select [On-hook] on the
screen displayed.
Note • We recommend that you set the monitor volume to [Loud] when using the On-hook feature. For
information on how to change the volume of the line monitor, refer to "5 Tools" > "Common Service
Settings" > "Audio Tones" > "Line Monitor Volume" in the Administrator Guide.
1
When the machine rings, the receiving screen appears.
If there is a telephone, pick the receiver up. If not, select [On-hook] on the receiving screen.
2
Confirm whether the call is from a telephone or a fax machine.
If the call is from a telephone, use the receiver to talk.
If the call is from a fax machine, you will hear the sound of a fax machine.
Note • If you select [On-hook], you will hear the sound from the machine speaker. However, you cannot talk
to the other party.
3
Press the <Start> button.
4
If you picked up the receiver, place it back in the cradle when the <Data> indicator lights up
on the control panel.
Important • Make sure to place the receiver back in the cradle properly. Otherwise, the line will remain "busy" with
the receiver being left off the cradle.