Fuji Xerox DocuCentre-IV C2263, Руководство пользователя

Страница: 173 / 443

About Internet Fax
173
Fa
x
4
Important • If the hard disk of the machine becomes full during Internet Fax transmission, the transmission is
canceled and the document data is deleted.
Note • If the hard disk of the machine becomes full during scanning of a document, a screen appears to
prompt you to select whether to send the job up to the stored pages or to cancel the job. Select one
of the processes.
Sending Internet Fax to regular fax machines via a relay station
By specifying e-mail addresses in a specific format, you can send a document to regular fax
machines (that do not support the Internet Fax service) via a network.
This feature enables the machine to first send a document to an Internet Fax-compatible
machine (fax gateway) by e-mail via the Internet. The e-mail document is then converted
to a fax document on the Internet Fax-compatible machine, and is forwarded to its
destinations. If you locate the fax gateway and regular fax machines within an area where
the same local rate applies, the fax transmission costs can be reduced.
Important • This feature is available only when the fax gateway can receive e-mail via SMTP.
Note • The e-mail received by the fax gateway is deleted even if the fax was not correctly sent.
• The setting specified in [Starting Rate] on the [Fax/Internet Fax Options] screen is used as the
communication mode from the fax gateway to the destination fax machine.
• You can restrict fax forwarding in [Fax Transfer from Address Book] and [Fax Transfer Maximum
Data Size] in the System Administration mode.
1
Select [Internet Fax].
2
Select any option.
3
Enter the e-mail address of the receiving machine in the following format:
Important • If the hard disk of the machine becomes full during Internet Fax transmission, the transmission is
canceled and the document data is deleted.
Note • If the hard disk of the machine becomes full during scanning of a document, a screen appears to
prompt you to select whether to send the job up to the stored pages or to cancel the job. Select one
of the processes.
Forwarding Files Stored in a Folder
You can automatically forward faxes stored in a folder, as e-mail attachments.
Faxes sent to folders using the fax signal method (proprietary communication procedures),
F Code method, or DTMF method, and faxes stored in folders by the Folder Selector feature
can be forwarded as e-mail attachments.
Important • This feature is available only when the mail receiving protocol is SMTP.
For information on how to forward files in a folder, send files to a folder, use the Folder Selector to receive files in a folder,
and print or delete files received in a folder, refer to "Checking/Operating Files in a Folder" (P.341).
FAX=
(fixed characters) Fax number of
the recipient /T33S= (fixed
characters) and F
code (if necessary) @ + host name of the
machine that
converts and sends
the received e-mail as
a fax. Domain
name
FAX= 0312345678 /T33S=123 @myhost. example.com
Example Fax number
F code (if necessary)
Host name of the receiving machine
Domain name of the receiving machine 0312345678
/T33S=123
myhost
example.com