Fuji Xerox DocuCentre-IV C2263, Руководство пользователя

Страница: 429 / 443

Glossary
429
Ap
pe
ndi
x
12
Cut Paper Standard paper sizes, such as A4 and B5.
Default Screen A screen displayed on the touch screen immediately after
switching the power on, or pressing the <Clear All> button. The
screen is also displayed when the Auto Clear feature is used.
Default Value A factory default value, or a value set in the System
Administration mode.
Dial In this guide, it refers to entering a recipient's fax number.
The method of dialing provided by the machine include: manual
dialing using the numeric keypad, speed dialing, one touch dialing,
and using the address book, etc.
Dial Tone A tone generated from the telephone line. It indicates that you
are connected to the line.
Dial Type The dial type of connected line. The machine offers two dial types:
Tone (push circuit) and 10PPS (dial circuit / 10PPS).
Direct Internet Fax Allows you to send e-mail directly to the Internet Fax-compatible
machines without going through the SMTP server, while Internet
Fax uses the SMTP server to send e-mail.
Document Image An image of a document scanned by the machine.
DPI An abbreviation of Dots Per Inch. A unit used to describe printing
resolution in terms of the number of dots printed in one inch. Used
as a unit to describe resolution.
ECM An abbreviation of Error Correction Mode.
A type of G3 transmission. ECM transmission sends the document
image data in segments and retransmits segments that the
remote machine receives incorrectly.
"ECM" described on the Activity Report shows that the
communication was processed using ECM.
Edge Erase A feature that erases the top/bottom, left/right or center edge of
a document image when copying.
Emulation This refers to operating the printer to achieve the same print
results as when printing with other manufacturers' printers. This
mode is called the Emulation Mode.
Energy Saver Feature A feature that switches the machine status to standby after a
period of inactivity.
The following energy saver features can be set for the machine.
z
Low Power Mode:
The power to the fusing unit and motor is lowered when the
machine is left unused for a fixed amount of time. The touch
screen goes out, and the <Energy Saver> button lights up.
z Sleep Mode:
Most of the units in the machine are in standby status. The
machine consumes the least power.
Error Code A code is displayed on the touch screen or a report when a
problem occurs.
Term Description