Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 300 / 603

11 System Settings
298
Sy
st
em Set
tin
gs
11
Note • You can set this item when [Primary Server Setup] is [By IP Address].
„ Primary Server Port Number
Set the Primary server port number in the range from 1 to 65535.
„ Secondary Server Setup
Select the secondary server specification method from [By IP Address] and [By Server
Name].
„ Secondary Server IP Address
Enter the secondary server IP address using values from 0 to 255.
Note • You can set this item when [Secondary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Secondary Server Name
Enter the name of the secondary server. Up to 64 characters are allowed.
Note • You can set this item when [Secondary Server Setup] is [By Server Name].
„ Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
„
Authentication with SSL
Configure whether to use SSL Communication for LDAP authentication and address
book search by LDAP.
To use the SSL communication, [Primary Server Port Number] and [Secondary Server
Port Number] must be set. The port number for the SSL communication of the LDAP
directory server is 636, in general.
„ Authentication Method
Select the method for LDAP authentication from [Direct Authentication] and
[Authentication of User Attributes].
When selecting [Authentication of User Attributes], the machine searches a user name
as [Attribute of Typed User Name] on the directory server, and converts the attribute
set in [Attribute of Login User Name] of the user name found into the user name for
LDAP authentication.
„ Attribute of Typed User Name
When [Authentication of User Attributes] is used for LDAP authentication, set an
attribute of a user name input. Up to 32 characters are allowed.
„ Attribute of Login User Name
When [Authentication of User Attributes] is used for LDAP authentication, set an
attribute of a user name to be authenticated. Up to 32 characters are allowed.
„ Use Added Text String
When [Authentication of User Attributes] is used for LDAP authentication, select
whether to use additional text strings for the user name.
„ Text String Added to User Name
Enter text strings for [Text String Added to User Name].
„ Search Login Name
Set a login name for address book search and access to the directory server by
[Authentication of User Attributes] of LDAP authentication. However, set this item only
when authentication is required for the directory service. Do not make the setting when
authentication is not required.
When setting the login name, you can enter up to 255 characters.