Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 94 / 603

3 Copy
92
Copy
3
„ Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.77).
„ Covers
For information on the feature, refer to "Covers (Attaching a Cover to Copies)" (P.78).
„ Annotation
For information on the feature, refer to "Annotation (Adding Stamp/Date/Page Number to Copies)"
(P.83).
„ Watermark
For information about the feature, refer to "Watermark (Printing Control Number on the Background)"
(P.86).
[Copy Job] screen
The following describes the screen that appears while the Build Job is being executed.
„ Chapter Start...
Displays the [Build Job - Chapter Start/Separators] screen.
Refer to "Build Job (Making Copies of Documents with Different Settings in a Single Operation)"
(P.91).
„
Change Settings...
The Copy screen appears and you can change the settings for the loaded document.
After setting the features, press the <Start> button on the control panel to start
scanning of the document.
„ Cancel
The document data stored by the Build Job feature is cleared and the job is canceled.
Note • The same operation is performed if you press the <C (Clear)> button or <Clear All> button
on the control panel.
„ Last Original
Select this to end scanning of documents. The build job starts.
„ Next Original
Select this when you have another document. This item is selected when using the
Build Job feature.
„ Start
When loading the next document and select [Start], the next documents are scanned.
Note • The same operation is performed if you press the <Start> button on the control panel.
[Build Job - Chapter Start/Separators] Screen
You can set the chapter start and separators.