Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 507 / 603

Error Code
505
Problem Solving
16
116-790
O [Cause] 1. If the operator cancelled printing a document that was
received using the Fax to Mailbox or iFAX to Mailbox
feature:
The first set of the document is not stapled.
2. For a cause other than Cause 1:
All the sets of the document are not stapled.
[Remedy] For Cause 1. Manually staple the first set of the document.
Or, do not cancel printing a document that is received
using the Fax to Mailbox or iFAX to Mailbox feature.
For Cause 2. Check if the staple position has been
correctly specified, and try printing again.
123-400
O [Cause] Machine malfunction
[Remedy] Power-cycle the machine. If the problem persists, contact
our Customer Support Center.
124-701
O [Cause] The output destination was changed to the center tray due
to the malfunction of the specified side tray.
[Remedy] Contact our Customer Support Center. Any trays other
than the defective output tray can be used.
124-702
O [Cause] The output destination was changed to the center tray due
to the malfunction of the specified Finisher tray.
[Remedy] Contact our Customer Support Center. Any trays other
than the defective output tray can be used.
124-704
O [Cause] The output destination was changed to the center tray due
to the malfunction of the specified output tray.
[Remedy] Contact our Customer Support Center. Any trays other
than the defective output tray can be used.
124-706 O [Cause] The folding setting was canceled.
[Remedy] Check the folding setting, and try to print again.
127-320
O [Cause] An error occurred with the machine.
[Remedy] Power-cycle the machine. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
124-708
O [Cause] The output tray was changed to the center tray because
the size of the paper used was different from the size
specified for the 2-Sided feature.
[Remedy] Check if the specified size paper has been loaded in a
paper tray.
124-709
O [Cause] The document exceeded the maximum number of pages
that can be stapled.
[Remedy] Reduce the number of pages, or cancel the stapling
setting, then try to print again.
Error Code
Category
Cause and Remedy
C P F S M O