Fuji Electric frenic mini series, Руководство пользователя

Страница: 38 / 269

3.2 Running Mode
3-7
Chap. 3
OP
ERA
T
ION US
ING
THE
K
EYP
AD
3.2.4 Jog (Inch) the Motor
In Running mode, pressing the + keys at the same time (simultaneous keying) can make the
inverter ready for jogging. The
JoG
appears on the LED monitor.
To return the inverter from the ready-to-jog state to the usual running state, you need to press the
+ keys simultaneously.
Using the external input signal command (JOG)
also allows the transition between the ready-to-jog
state and usual running state.
Refer to function codes E01 to E03 in Chapter 9, Section 9.2.2 "E Codes (Extension Terminal
Functions)" for details.
During jogging, the jogging frequency (C20) and acceleration/deceleration time for jogging (H54)
will apply. They are exclusively prepared for jogging and required to be set up individually.
When jogging the motor from the keypad, the inverter will only run while the
key is held down,
and contrarily the moment the key is released, the inverter will decelerate and stop the motor.
The transition ( + keys) between the ready-to-jog state and usual running state is
enabled only when the inverter is not in operation.