3
CAUTION :
Rotating the upper assembly part :
The upper assembly (housing and electronic unit) can not be rotated by 90° left or right just by
removing the 2 hexagonal socket bolts (M6 x 12)
If the assembly parts must be turned over than 90°, or if
the position is already amended since the delevery by Fuji,
it's necessary to remove the electronic unit from the
housing and disconnect the flat-cable from the electronic
measuring cell before turn the housing.
If necessary, amend the flatcable's position connecting
electronic unit and measuring cell, after fit the different
parts.
Failure to observe this may lead to the deterioration of the
flat cable, which is not covered by the manufacturer's
warranty.
