Fresa G024, Руководство по обслуживанию

Страница: 102 / 178

31 March, 1999 ENGINE SP MODE
4-5
Service
Tables
Follow the steps below to adjust registration in the “1. Margin” item of the engine
SP mode menu:
1. From the Pattern Print menu, select the media type and paper tray. Then, print
the registration adjustment pattern (4C overlay grid pattern).
2. Measure the distance from the paper edge to the first vertical and horizontal
lines of the grid patterns (X and Y in the diagram).
3. Move to the Adjust menu to adjust the vertical and horizontal registrations. The
adjustment range for the horizontal (Left) registration is between –2.0 and +2.0
mm in units of 0.4 mm. The adjustment range for the vertical (Top) registration
is between –2.5 and +2.5 mm in increments of 0.5 mm.
Adjustment standard values:
X (horizontal) = 12.7
±
1.5 mm
Y (vertical) = 10.8
±
1.0 mm
NOTE: The LCD panel displays the horizontal registration as “Left” and the vertical
registration as “Top”.
Y
X
Paper transport direction
G024P500.WMF