PAPER FEED/REGISTRATION UNIT
31 March, 1999
2-50
2.6.4 BY-PASS FEED TABLE
Drive
Drive transfers from the paper feed drive gear [A] to the by-pass paper feed clutch
[B] and the shaft [C].
The by-pass feed solenoid allows the pick-up roller to drop onto the top sheet of
paper (see the next page). The by-pass paper feed clutch controls the drive
change-over between the paper feed roller [D] and the pick-up roller [E]. (When the
clutch is on, the pick-up roller turns; when the clutch is off, the feed roller turns.)
The revolution of the separation roller [F] is synchronized with the main motor (in
the opposite direction to the paper feed roller).
Transparencies and thick paper are fed at half the speed of normal paper.
G024D407.WMF
By-pass feed solenoid
By-pass paper feed clutch
Registration sensor
Registration clutch
G024D523.WMF
Timing for black, LT, long edge feed
[A]
[B]
[C]
[D]
[E]
[F]
Содержание G024
Страница 1: ...FRESA G024 SERVICE MANUAL Engine...
