Fresa G024, Руководство по обслуживанию

Страница: 118 / 178

31 March, 1999 INSIDE THE MAIN UNIT
6-5
Replacement
Adjustment
6.2 INSIDE THE MAIN UNIT
6.2.1 GENERAL CAUTIONS
CAUTION: When replacing the components inside the main unit, follow the
instructions below.
1. When placing the PCU outside the printer, cover the photosensitive face with a
sheet of paper or a similar material to avoid direct exposure to light.
2. When rotating the PCU holder with the PCU removed, be careful not to touch
the detection face of the ID sensor.
3. Do not turn the PCU joints [A] manually. (Otherwise, the transfer belt [B] will
scratch the OPC belt [C].) To turn the OPC or transfer belt manually, set the
PCU in the main unit and check that the joints are engaged. Then, turn one of
the two flywheels at the rear. (First, pull the transfer cleaning contact/separation
lever to release the cleaner if the cleaning unit is contacting the belt .)
G024R500.WMF
[A]
[B]
[A]
[C]