Fresa G024, Руководство по обслуживанию

Страница: 103 / 178

ENGINE SP MODE 31 March, 1999
4-6
4.2.4 PARAMETER
Use this menu to specify the paper transfer bias and fusing temperature for normal
paper, thick paper, and OHPs.
The paper transfer bias can be specified in 1% increments between 50% and
200%. (Default: 100%)
The fusing temperature can be specified in three steps: Low, Normal, and High
(Default: Normal = 150
°
C). The Low temperature is the Normal temperature minus
15
°
C. The High temperature is the Normal temperature plus 15
°
C.
See the table below for Parameter menu details.
Layer 1 Layer 2 Layer 3 Layer 4
Std. Paper
Transfer Bias Bias
XXX%
Temp.
Low
Temp.
Normal
Parameter
Std. Paper
Std. Paper
Fusing Temp.
Temp.
High
Parameter
Thick Paper Same as Std. Paper Same as Std. Paper
Maintenance
2:Parameter
Parameter
Transparency Same as Std. Paper Same as Std. Paper
4.2.5 CLEAR MEMORY
Use this menu to reset all the settings stored in NV-RAM in the MCU or to reset the
jam and SC counters individually.
NOTE: Do not execute “All” in the field, because it clears all counters used to
manage the replacement cycles for supplies.
See the table below for Clear Memory menu details.
Layer 1 Layer 2 Layer 3 Layer 4
Clear Memory
SC Clear: SC
Press # to clear Clearing
SC
Clear Memory
Jam Clear: Jam
Press # to clear Clearing
Jam
Maintenance
3:Clear Memory
Clear Memory
All
NOTE: Factory use
only. Clear: All
Press # to clear Clearing
All
•
SC: Resets the SC counter and SC history log
•
Jam: Resets the paper feed jam counter, transfer jam counter, eject jam counter,
and jam history log