Fresa G024, Руководство по обслуживанию

Страница: 163 / 178

PAPER FEED SECTION 31 March, 1999
6-50
6.6.10 TRAY PAPER FEED CLUTCH, PAPER SIZE SWITCH, AND
PULL-OUT/RELAY ROLLER CLUTCH
1. Remove the front bottom cover (see Front Bottom Cover Removal) and the
paper feed roller (see Paper Feed Roller Removal).
2. With a flat-blade screwdriver, lift the hook [A] of the paper feed roller lever.
Push the paper feed roller shaft [B] towards the left until it disconnects from the
tray paper feed clutch [C].
NOTE: Rotate the shaft into the correct orientation when putting it back into the
clutch. (The shaft and the hole for the shaft in the clutch are D-shaped.)
Paper size switch
1. Remove the paper size switch bracket [D] (one screw).
2. Remove the paper size switch [E] (two hooks, one connector [F]).
Paper feed clutch
3. Remove the tray paper feed clutch [G] (one hook, one connector [H]).
NOTE: When installing the paper feed clutch, put the stoppers in the two holes
in the bracket before inserting the shaft.
G024R273.WMF
G024R274.WMF
[A]
[B]
[C]
[D]
[E] [F]
[G]
[H]