Fresa G024, Руководство по обслуживанию

Страница: 99 / 178

ENGINE SP MODE 31 March, 1999
4-2
Outline of the engine SP mode functions
The engine SP mode has the following menu items:
Menu Item Function and application
1: Margin Independent vertical/horizontal registration adjustment for each
tray, and for OHP mode
2: Parameter Independent adjustment of transfer bias and fusing temperature
for normal paper, thick paper, and OHPs
3: Clear Memory Resets the counters and other values stored in NVRAM
4: Sensor Check Sensor output check
5: Nip Width Nip width measurement for fusing pressure adjustment
6: Reset SC Resets fusing unit SC codes
7: Process Ctrl Implementation of forced, normal, and color bias setting process
control and setting of execution intervals for periodic process
control
8: Test Print Prints internally generated patterns (4C overlay grids, 4x4 color
belts, and solid-area color belts) for the print engine
9: ID Sensor PWM ID sensor output calibration
10: Image Adjust Adjustment of image reproduction ratio in the main scan and sub-
scan directions
11: Output Check Tests for motors, clutches, and solenoids
12: Hi-light Fine adjustment of density for highlight (low-ID) areas.
13: Lub_Interval Adjustment of lubricant application interval
4.2.2 MENU OPERATION/DISPLAY
In the engine SP mode menu, you can move between menu levels, specify
parameters, and view LCD indications in the same way as with the user menu.
The different menu items are described on the following pages. All menus are in
English only.
Key operation
[
▲
] and [
▼
] keys:
Scroll through the menus. When either of these keys is pressed
in a number setting menu, the displayed value changes by the
minimum value.
[# Enter] key: When the selected item has a lower level menu, pressing this
key moves you to the next lower level. At the lowest level, this
key is used to determine the specified setting or execute the
selected item.
[Escape] key: Pressing this key moves you to a higher level in the current
menu. Before the specified value is confirmed by the [# Enter]
key, pressing this key keeps the existing setting.