Fresa G024, Руководство по обслуживанию

Страница: 135 / 178

FUSING SECTION 31 March, 1999
6-22
6.4 FUSING SECTION
6.4.1 FUSING UNIT
ø
CAUTION
1. The fusing unit is hot. Handle with care.
2. Be careful not to spill silicone oil.
3. In the event of a fusing-related SC, replace the applicable components
and execute “6: Reset SC” in the engine SP menu to release the SC.
4. When the fusing unit has been replaced, execute “S3 Maintenance
Clear” in the controller SP menu to reset the fusing counter.
1. Remove the top cover. (See Top Cover Removal.)
2. Open the oil bottle cover [A] and remove the fusing unit [B] (three flat screws
[C] and a grounding wire).
NOTE: The flat screws retaining the fusing unit remain attached to the bottom of
the fusing unit stay even when they are fully loosened.
G024R168.WMF
[A]
[B]
[C]