manualshive.com logo in svg

Freescale Semiconductor MC9S12ZVHL32, Справочное руководство

Продукт Freescale Semiconductor MC9S12ZVHL32 представляет собой микроконтроллер высокой производительности. Для получения подробной информации о его функционале и возможностях, рекомендуем скачать бесплатное Руководство по эксплуатации на сайте manualshive.com. Получите полную картину производителя, загрузив руководство сегодня.

Поделиться
Скачать
background image

Chapter 9 Pulse-Width Modulator (S12PWM8B8CV2) 

S12ZVHY/S12ZVHL Family Reference Manual Rev. 1.05

334

Freescale Semiconductor

9.3.2.7

PWM Clock A/B Select Register (PWMCLKAB)

Each PWM channel has a choice of four clocks to use as the clock source for that channel as described 
below.

Table 9-10. PWMCTL Field Descriptions

Note:

Bits related to available channels have functional significance. Writing to unavailable bits has no effect. Read from 
unavailable bits return a zero

Field

Description

7

CON67

Concatenate Channels 6 and 7

0 Channels 6 and 7 are separate 8-bit PWMs.
1 Channels 6 and 7 are concatenated to create one 16-bit PWM channel. Channel 6 becomes the high order 

byte and channel 7 becomes the low order byte. Channel 7 output pin is used as the output for this 16-bit 
PWM (bit 7 of port PWMP). Channel 7 clock select control-bit determines the clock source, channel 7 polarity 
bit determines the polarity, channel 7 enable bit enables the output and channel 7 center aligned enable bit 
determines the output mode.

6

CON45

Concatenate Channels 4 and 5 

0 Channels 4 and 5 are separate 8-bit PWMs.
1 Channels 4 and 5 are concatenated to create one 16-bit PWM channel. Channel 4 becomes the high order 

byte and channel 5 becomes the low order byte. Channel 5 output pin is used as the output for this 16-bit 
PWM (bit 5 of port PWMP). Channel 5 clock select control-bit determines the clock source, channel 5 polarity 
bit determines the polarity, channel 5 enable bit enables the output and channel 5 center aligned enable bit 
determines the output mode.

5

CON23

Concatenate Channels 2 and 3

0 Channels 2 and 3 are separate 8-bit PWMs.
1 Channels 2 and 3 are concatenated to create one 16-bit PWM channel. Channel 2 becomes the high order 

byte and channel 3 becomes the low order byte. Channel 3 output pin is used as the output for this 16-bit 
PWM (bit 3 of port PWMP). Channel 3 clock select control-bit determines the clock source, channel 3 polarity 
bit determines the polarity, channel 3 enable bit enables the output and channel 3 center aligned enable bit 
determines the output mode.

4

CON01

Concatenate Channels 0 and 1

0 Channels 0 and 1 are separate 8-bit PWMs.
1 Channels 0 and 1 are concatenated to create one 16-bit PWM channel. Channel 0 becomes the high order 

byte and channel 1 becomes the low order byte. Channel 1 output pin is used as the output for this 16-bit 
PWM (bit 1 of port PWMP). Channel 1 clock select control-bit determines the clock source, channel 1 polarity 
bit determines the polarity, channel 1 enable bit enables the output and channel 1 center aligned enable bit 
determines the output mode.

3

PSWAI

PWM Stops in Wait Mode — 

Enabling this bit allows for lower power consumption in wait mode by disabling 

the input clock to the prescaler.
0 Allow the clock to the prescaler to continue while in wait mode.
1 Stop the input clock to the prescaler whenever the MCU is in wait mode.

2

PFRZ

PWM Counters Stop in Freeze Mode

 — In freeze mode, there is an option to disable the input clock to the 

prescaler by setting the PFRZ bit in the PWMCTL register. If this bit is set, whenever the MCU is in freeze mode, 
the input clock to the prescaler is disabled. This feature is useful during emulation as it allows the PWM function 
to be suspended. In this way, the counters of the PWM can be stopped while in freeze mode so that once normal 
program flow is continued, the counters are re-enabled to simulate real-time operations. Since the registers can 
still be accessed in this mode, to re-enable the prescaler clock, either disable the PFRZ bit or exit freeze mode.
0 Allow PWM to continue while in freeze mode.
1 Disable PWM input clock to the prescaler whenever the part is in freeze mode. This is useful for emulation.

Содержание MC9S12ZVHL32











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MC9S12ZVHL32

Danfoss VLT AQUA Drive FC 202 Installation Manual preview
VLT AQUA Drive FC 202
Бренд: Danfoss Страницы: 124
Danfoss AME 55 Installation Manual preview
AME 55
Бренд: Danfoss Страницы: 2
Danfoss AME 110 NL Datasheet preview
AME 110 NL
Бренд: Danfoss Страницы: 8
Danfoss AK-CH 650 User Manual preview
AK-CH 650
Бренд: Danfoss Страницы: 114
Danfoss AME 438 SU Installation Manual preview
AME 438 SU
Бренд: Danfoss Страницы: 24
Danfoss ECL Comfort 296 Operating Manual preview
ECL Comfort 296
Бренд: Danfoss Страницы: 159
Danfoss VLT AutomationDrive FC 301 Operating Manual preview
VLT AutomationDrive FC 301
Бренд: Danfoss Страницы: 78
Danfoss AME 335 Installation Manual preview
AME 335
Бренд: Danfoss Страницы: 20
Danfoss CCR2 Installation Manual preview
CCR2
Бренд: Danfoss Страницы: 64
hager coviva Smartbox TKP100A Configuration Manual preview
coviva Smartbox TKP100A
Бренд: hager Страницы: 45
Nabco Opus Control Installation Manual preview
Opus Control
Бренд: Nabco Страницы: 35
RBI FUTERA XLF Series Control Manual preview
FUTERA XLF Series
Бренд: RBI Страницы: 128
RBH Access Technologies UNC100 Hardware Manual preview
UNC100
Бренд: RBH Access Technologies Страницы: 36
S&C PMH Inspection Manual preview
PMH
Бренд: S&C Страницы: 11
S&C BankGuard PLUS Installation Manual preview
BankGuard PLUS
Бренд: S&C Страницы: 24
S&C BankGuard PLUS Operation preview
BankGuard PLUS
Бренд: S&C Страницы: 19
Xilinx ZC702 Getting Started Manual preview
ZC702
Бренд: Xilinx Страницы: 52
Lab.gruppen LAB.LEVEL4 Quick Start Manual preview
LAB.LEVEL4
Бренд: Lab.gruppen Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды