Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 88 / 175

9 Measurement
9.2 Measurement settings
FLUXUS G722ST-HT
2021-09-01, UMFLUXUS_G722ST-HTV1-2EN
88
9.2.6 Configuration of an output
If the transmitter is equipped with outputs, they have to be
configured. The measured value, the status value or an
event value can be transmitted via the different outputs.
In the following, the configuration of an analog output is
described.
• Select the program branch
Options
.
• Press ENTER.
Assignment of an output
• Select the menu item Outputs .
• Press ENTER.
• Select the output (here: Current I1(--) ).
• Press ENTER.
The scroll list contains all available outputs of the transmitter:
– Current Ix (--)
– Voltage Ux (--)
– Digital output
Bx (--)
If the output has already been enabled, it is displayed as follows: I1 (

) .
• Select Yes to change the settings for an already enabled output.
• Select No to cancel the assignment and to return to the previous menu item.
• Press ENTER.
Assignment of a source item
A source item has to be assigned to each selected output.
• Select a source item whose measured value, status value or event value is to be transmitted to the output.
• Press ENTER.
Options
Outputs
Select an output
Enable the output
Source item
see annex A
Options\Outputs\Current I1(--)
Options\Outputs\Current I1\Enable I1
Options\Outputs\...\Source item