Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 126 / 175

15 Inputs
15.1 Configuration of an input
FLUXUS G722ST-HT
2021-09-01, UMFLUXUS_G722ST-HTV1-2EN
126
15.1.3 Definition of a switching condition
A switching condition can be defined.
• Select Yes if a switching condition is to be defined. Select No to display the next menu item.
• Press ENTER.
If a switching condition is defined, several transmitter functions can remotely be triggered.
• Select a list item:
– MAX (x>limit) : the switching condition is met if the measured value exceeds the limit.
– MIN (x<limit) : the switching condition is met if the measured value falls below the limit
–
ERR (x=fail)
: the switching condition is met if a measurement is not possible.
– Within range : the switching condition is met if the measured value is within the defined range.
– Out of range : the switching condition is met if the measured value is outside the defined range.
• Press ENTER.
• Enter the limit for the switching condition.
• Press ENTER.
This display will only be indicated if
MAX (x>limit) or MIN (x<limit) is selected.
It is possible to define a hysteresis to avoid a constant switching of the event trigger.
The event trigger will be activated if the measured value exceeds the upper limit and deactivated if it falls below the lower
limit.
• Enter the value for the hysteresis.
If zero is entered, no hysteresis is used.
• Press ENTER.
This display will only be indicated if
MAX (x>limit) or MIN (x<limit) is selected.
• Enter the center of the switching range.
• Press ENTER.
This display will only be indicated if
Within range or Out of range is selected.
• Enter the width of the switching range.
• Press ENTER.
This display will only be indicated if
Within range or Out of range is selected.
• Enter a time interval at the end of which the event trigger has to switch.
• Press ENTER.
Special functions\Inputs\...\Trigger value
Special functions\Inputs\...\Function
Special functions\Inputs\...\Trigger value
Special functions\Inputs\...\Hysteresis
Special functions\Inputs\...\Range center
Special functions\Inputs\...\Range width
Special functions\Inputs\...\Glitch interval