Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 34 / 175

6 Mounting
6.2 Transducers
FLUXUS G722ST-HT
2021-09-01, UMFLUXUS_G722ST-HTV1-2EN
34
Step 3: Fixation of the tension strap to the pipe
One tension strap is fixed to the pipe using 2 opposite tension strap clamps. The second tension strap is mounted later.
Select the installation instruction of the supplied clasp:
Band clamp clasp
• Insert the tension strap into 2 tension strap clamps (see Fig. 6.16).
• Position the clasp and the tension strap clamps on the pipe (see Fig. 6.15). On a horizontal pipe, mount the tension strap
clamps laterally to the pipe, if possible.
• Place the tension strap around the pipe and insert it into the clasp (see Fig. 6.18).
• Make sure that the 2 tension strap clamps are as exactly as possible opposite each other. To do this, check whether the
distance between the tension strap clamps is half the pipe circumference.
• Tighten the tension strap.
• Tighten the clasp screw.
Quick release clasp
• Insert the tension strap into its clamps and the metal spring (see Fig. 6.16 and Fig. 6.17).
• Position the clasp, the tension strap clamps and the metal spring on the pipe (see Fig. 6.15):
– On a horizontal pipe, mount the tension strap clamps laterally to the pipe, if possible.
– Mount the metal spring opposite the clasp.
• Make sure that the 2 tension strap clamps are as exactly as possible opposite each other. To do this, check whether the
distance between the tension strap clamps is half the pipe circumference.
Fig. 6.15: Tension strap with clamp and metal spring on the pipe
1 – tension strap clamp
2 – clasp
3 – metal spring
Fig. 6.16: Tension strap with clamp Fig. 6.17: Tension strap with quick release clasp
and metal spring
1 – tension strap clamp 1 – clasp screw
2 – metal spring
3
1
2
1
2
1