Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 124 / 175

15 Inputs
15.1 Configuration of an input
FLUXUS G722ST-HT
2021-09-01, UMFLUXUS_G722ST-HTV1-2EN
124
15 Inputs
The inputs are configured in the program branch Special functions and assigned to the individual measuring
channels in the program branch Options .
15.1 Configuration of an input
If the transmitter is equipped with inputs, they have to be
configured.
• Select the program branch
Special functions .
• Press ENTER.
• Select the input to be configured.
• Press ENTER.
The scroll list contains all available inputs.
• Select a list item:
– Current Ix (-)
– Voltage Ux (-)
– Temperature Tx (-)
If the input has already been configured, it is displayed as follows: Current I1(

) .
Enabling the input
To use the input, it has to be enabled.
• Select
Yes
to enable an input or change the settings for an already enabled input.
• Select No to uninstall an already configured input and to return to the previous menu item.
• Press ENTER.
15.1.1 Temperature inputs
When configuring a temperature input, the temperature probe can now be selected.
Selection of the temperature probe
• Select the temperature probe:
– Pt100
– Pt1000
Activation of the temperature correction
A temperature correction (offset) can be set for each temperature input. This function is activated in the menu item
Special version\Dialogs/Menus .
• Select Yes to activate the temperature correction. Select No to deactivate it.
• Press ENTER.
Special functions
Inputs
→ Current Ix
→ Voltage Ux
→ Temperature Tx
see annex A
Special functions\Inputs
Special functions\Inputs\Current I1\Enable I1
Special functions\Inputs\Temperature Tx\Pt100/Pt1000
Special functions\Dialogs/Menus\Tx temperature offset
Notice!
The entered correction value for each temperature input will be stored and displayed when the temperature
correction is activated again.