Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 143 / 175

18 Advanced functions
FLUXUS G722ST-HT 18.5 Event triggers
143
UMFLUXUS_G722ST-HTV1-2EN, 2021-09-01
18.5 Event triggers
It is possible to configure max. 4 independent event triggers
per channel: R1, R2, R3 and R4.
The event triggers can be used, e.g., to:
– output information about the running measurement
– trigger special remote functions
– switch on/off pumps and motors
• Select the program branch Options .
• Press ENTER.
• Select the event trigger.
If an event trigger has already been installed, it is displayed as follows:
Rx(+) .
• Select Yes to change the settings for an already assigned event trigger or to assign a new one.
• Select
No
to cancel the assignment and to return to the previous menu item.
• Press ENTER.
• Select the source item (physical quantity) for which a condition has to be defined.
Options
Event trigger
Select Rx
Enable Rx
Source item
Define the function
see annex A
Options\Event trigger\Rx(-)
Options\Event trigger\Enable Rx
Options\Event trigger\Enable Rx\Source item
Tab. 18.2: Source items
source item list item output
Flow quantities Flow velocity flow velocity
Operation vol. flow operating volumetric flow rate
Mass flow rate mass flow rate
Totalizers Volume (+) totalizer for the volumetric flow rate in positive flow direction
Volume (-) totalizer for the volumetric flow rate in negative flow direction
Volume (Δ) difference of the totalizers for the positive and negative flow direction
Mass (+) totalizer for the mass flow rate in positive flow direction
Mass (-) totalizer for the mass flow rate in negative flow direction
Mass (Δ) difference of the totalizers for the positive and negative flow direction