58
Festo — EXCH — 2022-03b
Mounting (vertical mounting position)
8. Fasten X-axis 2
2
with the mounting kits in the threaded holes of the mounting surface. If
necessary, lift the Y-axis (cross-brace) with 2 persons. Loosely fasten the socket head screws of
the mounting kits.
2
3
9. Lift the Y-axis (cross-brace) with 2 people and push it back and forth over the entire stroke of the
X-axis.
10. Align the profiles of the X-axes so the socket head screws of the mounting kits are as close as
possible to the middle of the slot.
11. Tighten the socket head screws of all mounting kits. Tightening torque 24 Nm
12. Remove the 2 transportation locks on the end caps and drive covers.
