Festo EXCH, Руководство по эксплуатации

Страница: 55 / 86

Festo — EXCH — 2022-03b
Mounting (vertical mounting position)
55
1. Demount the X-axis drive motors.
DANGER
Serious injuries due to the motor falling.
• Demount the motors on the pallet before mounting the planar surface gantry.
• Secure the motor to prevent it from falling before removing the motor attachment screws.
2. Attach a suitable lifting device to the 2 transport lugs of the transportation lock at the drive covers
è Fig. 29.
The Y-axis (cross-brace) must be in the end position at the opposite end caps.
WARNING
If the transport lugs are incorrectly loaded, the lifting eye bolts will break.
Danger of death and property damage due to falling planar surface gantry!
• Load the 2 transport lugs evenly and at an angle of
£
45°.
• Do not apply tension from the side to the lifting eye bolts of the transport lugs.
3. Align the transport lugs.
Adjust the lifting eye bolt orientation to the direction of force of the lifting gear:
–
Loosen the nuts of the lifting eye bolts on the 2 transport lugs.
–
Rotate the 2 lifting eye bolts to the direction of the load.
–
Tighten the 2 nuts of the lifting eye bolts. Tightening torque 24 Nm
4. Position the planar surface gantry on the mounting surface with the lifting equipment.
WARNING
Danger of crushing at high lifting speed.
• Lift and move the planar surface gantry with an appropriate lifting speed.
5. Position the mounting kits on the threaded holes of the mounting surface è Fig. 6.