Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 132 / 148

A. Technical appendix
A−20
Festo P.BE−CB−COMP−en en 0503c
CHB−C−P/..X: PLC connector socket
O/7 blue OUT24_PLC_Power Reference voltage + 24 V DC
(signal level after Boot procedure = HIGH)
O/8 red OUT24_Feeder Controlling the small parts conveyor
I/9 black IN24_Cam_Enable External camera trigger
1)
I/10 violet IN24_Ext_Sensor External sensor
1) 2)
with CHB−..X
External type selection:
Bit 3
I/11 grey/pink IN24_Key_Inhibit Button lock
I/12 red/blue IN24_Jam1 Buffer zone sensor 1
I/13 white/green IN24_Jam2 Buffer zone sensor 2
1)
with CHB−..X
External type selection:
Bit 2
O/14 brown/green OUT_PWM Do not connect
I/15 white/yellow IN24_Ext_Teach Select Teach mode / next orientation
3)
O/16 yellow/brown OUT24_Res2 not assigned
O/17 white/grey OUT24_Error Fault status 1: Status message Fault"
I/18 grey/brown IN24_Counter−Rst Start new counting cycle
I/19 white/pink IN24_Ext−Fault External fault E01
1)
I/20 pink/brown IN24_TypeSel0 External type selection: Bit 0
O/21 white/blue OUT24_BOX_READY 24 V DC reference voltage for buffer zone sensor /
Ready to operate / Control conveyor device
O/22 brown/blue OUT24_Counter−fin Target number reached
O/23 white/red OUT24_Warning Fault status 0: Status message Warning"
1)
O/24 brown/red OUT24_Res1 Not assigned
1)
Functions with a grey background have been deactivated at the factory and can be activated and
adapted with CheckKon.
2)
The counting function and the special function External sensor" cannot be used at the same time.
3)
Customer−specific function. Consult your Festo Service if you have any problems.
Tab.A/12: PLC connector socket