Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 92 / 148

5. Teaching parts
5−4
Festo P.BE−CB−COMP−en en 0503c
Please note
Check in the test mode whether the actuators used
(e.g.blow−down nozzles) can sort out reliably large con
veyed parts made of heavy materials with streamlined
form. This is to ensure that no sample parts are transpor
ted by mistake to the next machine in the process.
Selecting the sample parts
·
Provide sample parts for each parts type as follows:
The sample parts should manifest all properties which
distinguish a part accepted as Good."
If possible, use various sample parts with the usual
scatter of characteristics (recommendation: min. 6
sample parts). With the scatter of characteristics, you
determine the extent to which the test parts classified
as Good" may differ from each other.
Diagnostic mode
·
Start CheckKon in order to display and set the system
parameters during the TEACH and test modes.
When Checkkon is started, it carries out a system test and
switches the Checkbox automatically to the diagnostic mode.
Please note
In the diagnostic mode the Checkbox transmits additional
information via the diagnostic interface. During the trans
mission time no parts are checked.
·
Do not operate the Checkbox in diagnostic mode with
the full rate of parts.
In this way you can prevent parts from passing the actua
tor positions unchecked.