Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 71 / 148

4. I/O module extensions of the CHB−C−P/..X
4−7
Festo P.BE−CB−COMP−en en 0503c
I/O functions of the PLC interface Pin
Remote Start Start/Stop mode I/6
Selecting the parts type External type selection: Bit 0 I/20
External type selection: Bit 1 I/5
External type selection: Bit 2
1)
I/13
External type selection: Bit 3
1)
I/10
Controlling the teach procedure
2)
Selecting the teach mode and the next
orientation I/15
Saving teach data I/6
Locking the control panel Button blocking I/11
Counting function
3)
Starting a new counting cycle I/18
Target number reached O/22
Controlling the transfer position for
good parts Actuator 1 O/1
incorrectly orientated good parts or
Incorrect parts type
Actuator 2 O/2
bad/foreign parts Actuator 3 O/3
Controlling the parts supply Buffer zone sensor 1 I/12 Controlling the parts supply Buffer zone sensor 1 I/12
Controlling the small parts conveyor O/8
Readiness to operate, controlling the conveyor
device O/21
Fault messages Fault status 1: Status message Fault" O/17
1)
Only for type CHB−C−X.
2)
Customer−specific function. Consult your Festo Service if you have any problems.
3)
Counting function and special function External sensor" cannot be used at the same time.
Tab.4/3: I/O functions of the PLC interface