Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 103 / 148

6. Testing parts
6−5
Festo P.BE−CB−COMP−en en 0503c
5. Check the correct output at the output positions for good,
bad or incorrectly−orientated parts with as many test
parts as possible.
6. On the basis of the sample parts, check the test parts with
regard to their grading. If you have also tested faulty
parts, check whether these have actually been recognized
as bad.
If too many good parts have been graded and sorted out
as Bad":
·
Increase the tolerance (see chapter 6.3).
·
Repeat the Teach procedure with more sample parts,
using the conveyor device intended for automatic
mode (see chapter 5).
7. Note the displays on the Checkbox.
When a conveyed part is registered, the status display
lights up briefly.
The display shows for 1.5 seconds:
A...
#...
·
the assessment of the test part deviation A
(chapter6.4.2)
·
the assesment of the test part orientation # , if more
than one orientation has been learnt (chapter 6.4.3).
If the quality check and position recognition for sorting the
parts are not satisfactory, you can use additional operating
parameters and tools with CheckOpti in order to optimize the
test results. Please consult your technical advisor.