Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 17 / 148

Contents and general instructions
XV
Festo P.BE−CB−COMP−en en 0503c
Term/abbreviation Meaning
Parts type Conveyed part defined by the Teach data of the sample parts.
Sample parts Good parts which have been selected for the Teach procedure and which
possess all the features necessary for identifying the parts type.
(System) parameters Settings of the Checkbox (in some cases can only be set with configuration
software).
Teach data All features ascertained during the Teach procedure, each with min./max.
limits and the average value.
TEACH mode Operating mode of the Checkbox in which the Teach procedure is carried
out.
Teach procedure During the Teach procedure, sample parts on the conveyor belt are shown
to the the Checkbox and the features are scanned. This is also referred to as
Teaching parts."
Test data The test data are the data used for the test. These correspond to the Teach
data plus admitted tolerances.
Test parts All parts shown during the test procedure.
Test procedure During the test procedure, test parts on the conveyor belt are shown to the
Checkbox and graded according to their features with regard to orientation
and observance of the tolerances. This is also referred to as Testing parts."
Tolerance Factor in per cent related to the average values and which affects the
min./max. limits of all features.
Tab.0/2: Terms and abbreviations